EPDM Rubber Roofing Birmingham One Sheet of Rubber, Fitted Cold
EPDM rubber roofing in Birmingham is what we fit when a garage or extension roof needs a covering with almost nothing to go wrong: one continuous sheet of synthetic rubber, bonded cold, with no seams down the middle and no flame anywhere near your home.
From our Lifford Close base in Stirchley we survey free, quote in writing and fit rubber roofs across south Birmingham. Flat roof work is priced by the roof, not by the postcode.
Free Rubber Roof Quote
Tell us the roof, we do the rest.
Get Your Estimate 07831 854918Free survey. Fixed price in writing.
What EPDM Actually Is
EPDM is a synthetic rubber membrane, cut to size and supplied in sheets wide enough to cover most domestic flat roofs in a single piece. Where old felt needed laps, joints and a torch to hold it together, a rubber roof is one continuous skin with only the edges and corners dressed by hand.
That matters in Birmingham for two reasons. First, our weather swings from summer heat to hard frost, and rubber flexes through all of it without splitting the way aged felt does. Second, it goes on cold. The adhesive bonds the membrane to the deck with no naked flame, which keeps the risk down on terraced streets in Stirchley and Kings Heath where homes sit close together.
It is not the answer to every roof, and we will say so. For awkward shapes and balconies we usually point people at GRP fibreglass roofing instead, and for straightforward roofs on a tighter budget modern felt roofing still does a sound job. An honest recommendation costs you nothing at the survey.
Where Rubber Earns Its Keep
Garage roofs
The classic rubber job. Most single garages take one sheet with no joins, fitted in a day once the deck is checked, and no torching beside the boundary wall.
Extensions
Rear kitchen extensions and utility rooms across Moseley and Hall Green, waterproofed in one sheet with the upstands dressed properly where the roof meets the house wall.
Dormers and porches
Small flat areas that leak first and get inspected last. Rubber handles the shape changes and drip edges cleanly, and the job rarely takes more than a day.
How a Rubber Roof Goes On
-
1
Free survey, deck first. We look at the roof before we talk about rubber. If the decking is sound and dry an overlay may be possible; if it has gone soft the old covering comes off and new boarding goes down. The quote reflects what the roof needs, not what is quickest.
-
2
Written fixed price. Every job is quoted in writing before work starts, with the price staying put once agreed. Flat roofs are priced by the roof, not by the postcode.
-
3
Cold bonding. The membrane is rolled out, adhered with water-based bonding adhesive and dressed at the edges, upstands and outlets. No gas, no torch, no fire risk.
-
4
Trims and finish. Drip edges are set so water discharges into the gutter rather than down the fascia, and the junctions where the roof meets brickwork are detailed so they stay watertight for the life of the membrane.
Rubber Roofs We Repair, Not Just Fit
An existing rubber roof usually fails at a detail rather than across the sheet: a trim that has lifted in the wind, a seam where two sheets met on a larger roof, or a puncture from a dropped tool years ago. Those are repair jobs, and we carry the matched materials to do them properly rather than smearing sealant over the problem.
Active leaks get priority attendance from us whatever the roof is made of. Trace how we find and fix them on the flat roof leak repair page, see the wider range of flat roof systems we fit, or read about our roofers in Stirchley for work on the doorstep of our own B14 base.
EPDM Rubber Roofing FAQs
How long does an EPDM rubber roof last?
EPDM is one of the longest-lived flat roof membranes on the market, and manufacturers quote service lives measured in decades rather than years. What decides how long yours actually lasts is the quality of the fitting, above all the detailing at edges, upstands and outlets, which is where we spend the time.
Can you fit EPDM over my old felt roof?
Sometimes, yes. If the old felt is sound, dry and well bonded and the decking beneath is solid, an overlay can be fitted. If the felt is blistered, wet underneath or the deck has gone soft, the honest option is to strip back to sound decking first, and that is what the free survey checks before anyone quotes.
Is EPDM suitable for a garage roof?
It is the classic use for it. A standard single garage roof can often be covered in one sheet of EPDM with no joins at all, and because the rubber goes on cold there is no torching next to your house or the neighbour's fence.
Do you use torches or flames when fitting EPDM?
No. EPDM membranes are adhered cold with water-based bonding adhesive, so there is no naked flame anywhere near your property at any point of the installation.
How is EPDM different from felt or fibreglass?
EPDM is a single sheet of synthetic rubber with almost no joints, fitted cold. Torch-on felt is built up in layers and suits tight budgets, while GRP fibreglass is a seamless wet-laid finish that suits awkward shapes and balconies. We fit all three and recommend the one that fits your roof, not the one we happen to have on the van.
How much does an EPDM roof cost in Birmingham?
It depends on the size of the roof, the state of the decking and the access, and we price by the roof, not by the postcode. The survey is free and the quote is written and fixed, so you know the full price before any work starts.
Get a Quote for a Rubber Roof
Tell us what the roof covers and where you are in Birmingham. We survey free, advise honestly on rubber versus the alternatives, and put the price in writing before any work begins.
Pro Tech Roofing & Property Maintenance, Lifford Close, Birmingham B14 6QL